Hardware Configuration |
Master Chip | MTK7628KN , 8MB DDR RAM Inside |
Flash | 1MB |
Size | 140*75*34mm |
Wireless Technology | 2.4G(802.11b/g/n)2T2R |
Antenna | ওInbuilt 13dBi Dual Polarization HG Directional Panel Antenna |
Wireless Speed | 2.4G 300Mbps |
Network Port | 1*10/100Mbps RJ45 |
Power | DC 12V 1A / POE 24V 0.5A |
Button | 😼1*Digital Switch, Short Press to Change the Displayed Number 1*Reset,Long Press 5s to Reset 1*Toggle Switch, Dial to Convert Host/Subordinative |
Transmission Distance | 300m |
Operating Frequency | 802.11b/g/n: 2.400GHz~2.4835GHz (China) |
Output | 🧸802.11n: @MCS7:14±2dB, @MCS0:16±2dB 🥃802.11g: @54M:15±2dB, @6M:17±2dB 🐼802.11b: @11M:17±2dB, @1M:19±2dB |
EVM | 𒈔802.11n: ≤-28 DB 802.11g: ≤-25 DB 802.11b: ≤-10 DB |
Support Wireless Speed | 802.11n: 6.5Mbps and 300Mbps |
Work Environment | TEMP:-30℃~+55℃(work),-40℃ ~+70℃(storage) ♋Humidity(Non-Condensing):10%~90%(work),5%~95%(storage) |
Waterproof Rate | IP65 |
Signal Indicator LED | Bridge Access Point:Output Indicator 🌜Under 25%(SIG1 on),25%~50%(SIG1-SIG2 on),50%~75%(SIG1-SIG3 on),75%~100%(SIG1-SIG4 on) Bridge Client:Signal Strength Indicator ꧅The light on in turn when connection fails. If connection succeed, ꦇ0~-65dBm(SIG1-SIG4 on),-66~-75dBm(SIG1-SIG3 on),-76~-85dBm(SIG1-SIG2 on),under -86dBm(SIG1 on) |
LAN1 GigE Indicator | ꧅Flicker When Wire Data Transmission , Off When Wire Disconnects |
|
Wireless Indicator | 🍌Flickers When Bridge is Running Normally with Power |
|
Power Indicator | With Power, On Without Power, Off |
|
|
|
|